Micro Inline 3, 5, and 10

Inline hollow-fibre membrane filter for water hygiene

  • Effective protection against waterborne bacteria through sterile filtration
  • High flow rate
  • Flow volume of 3,000, 13,000 or 56,000 litres (guide value)
  • Compact desgin and easy changebility
  • Connection options: 8 mm push-fit quickrelease coupling or G½ʺ screw thread

The filters are designed for use as an end filter for point-of- use water applications like water coolers, water dispensers, refrigerators and ice machines. The cartridges are compact so they will fit in existing machine configurations. The connection options of 8 mm push-fit and G½ʺ screw thread offer ease of installation and changeability. The Micro Inline 3, 5 and 10 range deliver high flow rates. The flow volumes shown in the table are for guidance only. The particular filters operating time is dependent on the flow volume and water quality.

Micro Inline 3

Size: L 118 mm x Ø 47 mm
Bacteria retention: 7 log steps Brev. dim.
Pore size: 0.2 μm (microfiltration)
Flow volume*: 3,000 litres
Chlorine resistance**: ≤ 10 ppm
Flow rate (at 5 bar, 20°C): 13 l/min
Max. operating pressure: 5 bar
Operating temperature***: ≤ 40 °C
Connection: Variant S: G½ʺ, screw thread AG Variant P: Push-fit quickrelease coupling Ø 8 mm

Micro Inline 5

Size: L 150 mm x Ø 61 mm
Bacteria retention: 7 log steps Brev. dim.
Pore size: 0.2 μm (microfiltration)
Flow volume*: 13,000 litres
Chlorine resistance**: ≤ 10 ppm
Flow rate (at 5 bar, 20°C): 22 l/min
Max. operating pressure: 5 bar
Operating temperature***: ≤ 40 °C
Connection: Variant S: G½ʺ, screw thread AG,  Variant P: Push-fit quickrelease coupling Ø 8 mm

Micro Inline 10

Size: L 210 mm x Ø 68 mm
Bacteria retention: 7 log steps Brev. dim.
Pore size: 0.2 μm (microfiltration)
Flow volume*: 56,000 litres
Chlorine resistance**: ≤ 10 ppm
Flow rate (at 5 bar, 20°C): 30 l/min
Max. operating pressure: 5 bar
Operating temperature***: ≤ 40 °C
Connection: Variant S: G½ʺ, screw thread AG Variant P: Push-fit quickrelease coupling Ø 8 mm

* Guide value recorded at a flow rate of 6 l/min. and mains water quality at 5 bar; user-specific water quality, pressure conditions and the requisite flow rate have an influence on the flow volume and filter operating time.
** Continuous dosage of ≤ 10 ppm over operating time; short-term (1h) high dosage (400,000 ppm h) for chemical disinfection.
*** Application with higher temperatures only after consultation with Prime water.

Product overview