DualStage MF 10-P

Pre-filter combined with MF membrane insert

The DualStage MF 10-P combines particle filtration and micro-filtration in a single 10ʺ cartride making it ideal for water with high particl loading which needs to be microbiologically safe.

  • Bacterial retention: > 99,99999%
  • Polypropylene pre-filteration
  • No impact on chlorineresidual
  • Fits standard 10 inch housing

The DualStage MF 10-P filter consists of a 9 ¾ʺ high quality 1 μm polypropylene thermal bonded prefilter and a Prime Water® MF membrane cartridge at its core. Water flows from the outside through the polypropylene pre-filter and exits through the membranes. The DualStge MF 10-P is particularly suite to situations with a high particle load in the water, where removal of dissolved substances like chlorine is not required.

  • Membrane type: Prime Water® MF, asymmetric hydrophilic capillary membranes
  • Membrane material: PES
  • Max. pore size*: 0,20 μm absolute
  • Bacterial retention: > 99,99999% (log 7) ASTM F838-05
  • Cartridge size: 62 x 248 mm (OD x Length)
  • Weight: 260 g
  • Max. pressure: 5 bar (75 psi)
  • Max. temp: 40°C (104°F)
  • Flow rate: 8 L/min @ 2 bar
  • Service life**: +/- 3.000 L
  • Material: Prefilter: polypropylene
    End-caps: ABS
    Filter tube: HIPS
    Potting: 2K epoxy resin

* Membrane cartridge tested for integrity according to ASTM D6908-06.
** Service life depends on local water conditions, the amount of micro particles (SDI) and level of prefiltration. SDI measured according to ASTM D4189-95. European guidelines prescribe exchange of cartridge after 6 months.